Foot Protector Installation Tips

Installing the Foot Protectors is fairly simple. All you need to do is drop them into hot water ~80° C for around 10 seconds and this will make the plastic pliable.

Whilst pliable, simply slip them over the bolt head and squeeze together whilst the plastic cools.

The ‘spreader tool’ will help you to open up the slot prior to installation if needed.

Removal is a little more difficult (for good reason). You can dip a sponge in hot water and apply to the plastic. This will assisting in their removal. Alternatively, you could use a flat head screwdriver to pry open the slot, but do be careful not to slip as it could damage both your doll and the protectors.